Wall mount for Löwenstein Prisma Smart/Soft + Aqua humidifier

Suitable for:
✅ Löwenstein prism SMART (plus/max)
✅ Löwenstein prisma SOFT (plus/max)
✅ prisma AQUA humidifier
(A mount for the prism without Aqua can be found in my shop.)
• Includes mounting hardware (anchors & screws)
• 3D printed from PETG (polyethylene terephthalate glycol)

⚡ Note: To allow the cable to be routed downwards, the angled power plug is used (see example image).
This plug is usually included with Prisma devices.

🧱 MATERIAL & RESISTANCE (PETG)
• PETG is characterized by high impact resistance and dimensional stability.
• The material is UV and water resistant and is therefore ideal for long-term use.
• Also ideally suited for use in **motorhomes, campers or vans** – vibration-resistant and insensitive to temperature fluctuations.
• PETG remains stable even under changing temperatures and does not discolor.

✅ QUALITY & DURABILITY
• Thanks to the PETG material and the well-designed structure, the holder remains dimensionally stable and reliable even under continuous load.
• Short-term load test with 12 kg passed without any noticeable deformation (see image).
• Very durable and low-maintenance when properly installed.

🖐️ PRECISE MANUFACTURING IN 3D PRINTING
• Minimal irregularities or printing marks can occur due to the 3D printing process
• without compromising strength, appearance or function.

📦 Scope of delivery
• 1× bracket
• 2× screw 4.5 × 50
• 2× Fischer DUOPOWER 6 × 30 S LD dowels
• 2× Washers

🛠️ ASSEMBLY INSTRUCTIONS
Required tools: Drill (6 mm), Torx T25
1) Hold the bracket in the desired position and mark the drill holes.
2) Drill at least 50 mm deep into the wall using a 6 mm drill bit.
3) Insert the dowel completely and flush.
4) Attach the bracket using the included Torx T25 screws and washers.

⚠️ NOTICE & LIABILITY
Please check before installation whether the wall condition and mounting are suitable for your device.
Assembly is carried out at your own risk. We cannot accept liability for damage caused by improper assembly, excessive load, unsuitable surfaces, or external influences.

❓ QUESTIONS OR SUGGESTIONS
Just write to me – I'll be happy to help!

Product safety information
Not suitable for children – choking hazard due to small parts (screws).
Intended only for mounting the Löwenstein prisma SMART & SOFT (plus/max).
Disposal: PETG parts via plastic waste, screws via metal waste.