Wall mount for ResMed AirSense 11 | Premium mount including wall plugs and screws | Perfect for bedrooms and RVs

🔹 PRODUCT DESCRIPTION
• Compatible with ResMed AirSense 11 (with and without water tank)
• Includes mounting hardware (anchors & screws)
• 3D printed from PETG (polyethylene terephthalate glycol)
• The water tank can be removed very easily.
• Hose routing possible in different directions: left, right and below

🧱 MATERIAL & RESISTANCE (PETG)
• PETG is characterized by high impact resistance and dimensional stability.
• The material is UV and water resistant and is therefore ideal for long-term use.
• Also ideally suited for use in **motorhomes, campers or vans** – vibration-resistant and insensitive to temperature fluctuations.
• PETG remains stable even under changing temperatures and does not discolor.

✅ QUALITY & DURABILITY
• The bracket is designed to be particularly stable due to its geometry.
• The device stands securely: non-slip, does not wobble, cannot tip forward.
• Passed short-term load test with 20 kg without any noticeable deformation.
• Very durable and low-maintenance when properly installed.

🖐️ PRECISE MANUFACTURING IN 3D PRINTING
• Minimal irregularities or printing marks can occur due to the 3D printing process
• without compromising strength, appearance or function.

📦 Scope of delivery
• 1× bracket
• 2× screw 4.5 × 50
• 2× Fischer DUOPOWER 6 × 30 S LD dowels
• 2× Washers

🛠️ ASSEMBLY INSTRUCTIONS
Required tools: Drill (6 mm), Torx T25
1) Hold the bracket in the desired position and mark the drill holes.
2) Drill at least 50 mm deep into the wall using a 6 mm drill bit.
3) Insert the dowel completely and flush.
4) Attach the bracket using the included Torx T25 screws and washers.

⚠️ NOTICE & LIABILITY
Before installation, please check that the wall surface and mounting hardware are suitable for your device. Installation is carried out at your own risk. We cannot accept liability for damage caused by improper installation, excessive load, unsuitable surfaces, or external influences. Follow the installation instructions and check the mounting hardware regularly.

❓ QUESTIONS OR SUGGESTIONS
Just write to me – I'll be happy to help!

Product safety information
Not suitable for children – choking hazard due to small parts (screws).
Intended only for mounting the ResMed AirSense 11 device.
Disposal: PETG parts via plastic waste, screws via metal waste.