Skip to product information
Wall mount Basic | ResMed AirSense 10 / AirCurve 10
Wall mount Basic | ResMed AirSense 10 / AirCurve 10

Wall mount Basic | ResMed AirSense 10 / AirCurve 10

€27,99
SKU: CH-1020
plus €5.99 shipping
Colour
Assembly state on delivery

Mount for secure, space-saving wall installation.

Compatibility
• Devices: ResMed AirSense 10, AirCurve 10 and Lumis 100/150 (not Lumis HFT)
• Tubing: Standard, SlimLine and ClimateLineAir / Oxy
• Water tank: with & without HumidAir humidifier

Details
• simple screw assembly
• hook-and-loop strap to secure the device
• available in various colours: white, black, grey (see example image)

Notes
• The tubing connection faces away from the wall, and the display faces towards the wall.
• To remove the water tank, the device must be lifted out of the mount.

Package contents
• 1× mount (consisting of 3 individual parts) 
• 8× countersunk screws (M4 × 12 mm)  
• 8× self-locking nuts (M4)  
• 1× hook-and-loop strap
• 2× screws (4,5 × 50 mm)
• 2× Fischer DUOPOWER wall plugs (6 × 30 S LD) 
• 2× washers

Please also read the following notes and information about this product.

More mounts for AirSense 10 / AirCurve 10 →

Questions or special requests?
Do you have questions about the product, is anything unclear, or would you like a custom adjustment? Feel free to contact us.
Stability & load capacity

The mount is made from high-quality PETG and is designed for continuous use.

• high impact resistance and dimensional stability
• UV- and water-resistant
• resistant to temperature fluctuations
• resistant to vibrations

• very sturdy construction thanks to well-designed geometry
• lasting secure support for your device

A short-term load test was carried out with a load of 12 kg without noticeable deformation.
Manufacturing process

This mount is manufactured using precision 3D printing. Each component then undergoes a careful visual inspection.

The manufacturing process may result in minor surface characteristics typical of printing.

  • without affecting stability, appearance or function.
  • not a quality defect
Assembly & installation

1. Screw the mount together

Tools required (tools are not included in the delivery):
• Allen key (2,5 mm)

  1. Place the individual parts in the assembly position as shown in the illustration.
  2. Insert the lock nuts into the designated hexagonal recesses (locking ring facing outwards).
  3. Insert the screws and tighten them gently. Slight resistance is sufficient.

2. Install the mount on the wall

Tools required (tools are not included in the delivery):
• Drill bit (6 mm)
• Torx T20

  1. Hold the mount in the desired position and mark the drill holes.
  2. Drill at least 50 mm into the wall using a 6-mm drill bit.
  3. Insert the wall plugs fully and flush with the surface.
  4. Secure the mount using the supplied Torx screws and washers.
  5. Insert the device as shown in the illustration and gently tighten the hook-and-loop strap.

For installation on other surfaces, you must select suitable fixings yourself. Use of the washer is recommended to provide a larger bearing surface.
Shipping & delivery time

• shipped from Germany
• usually processed within 1–3 working days
• delivery then takes a few working days, depending on the delivery area
• tracking available after dispatch

Note on shipping to Switzerland:
Additional customs clearance fees may apply.
Based on experience: approx. 7.7 % import tax + approximately 11–18 CHF (CH-Post/DHL).
The recipient bears these fees. Information provided without guarantee.
Safety & liability

Please observe the following instructions for safe use:

• installation is carried out at your own responsibility
• check the mounting surface and wall condition before installation
• use suitable fixings for the mounting surface
• regularly check that the mount and fixings are secure

Liability for damage resulting from improper installation, an unsuitable mounting surface, overloading or external forces is excluded.

No liability is accepted for indirect or consequential damage, in particular to the mounted device.
Product & material information

• not suitable for children – choking hazard from small parts
• use only for the intended purpose
• PETG can soften at temperatures from approx. 70 °C

Disposal:
• dispose of PETG components and the hook-and-loop strap with plastic waste
• dispose of screws and washers with metal waste

Manufacturer details

Marc Fenzl
cpap-halterungen.de
Peter-Michels-Str. 49
50827 Köln
Germany
Email: info@cpap-halterungen.de