Skip to product information
Bed Frame Mount | ResMed AirSense 10
Bed Frame Mount | ResMed AirSense 10

Bed Frame Mount | ResMed AirSense 10

€29,99

plus shipping costs
Color

Bed Frame Mount for ResMed AirSense 10 for secure and space-saving installation without drilling.

• Suitable with and without water tank  
• Individually manufactured to your required dimension (1 – 76 mm)  
• Simple screw installation    
• Hook-and-loop strap for positioning and securing the device  
• Available in various colors: white, black, gray (see example image)

Please note the mounting orientation: The hose connection should face away from the bed.

Please enter dimension “a” in millimeters in the input field.
“a” = Bed frame width + clearance (minimum +1 mm)
Example: If the bed frame measures 26 mm → please enter “a” = 27 mm.

Scope of delivery
• 1× Mount (consisting of three parts)  
• 8× Countersunk screws (M4 × 12)  
• 8× Safety nuts (M4)  
• 1× Hook-and-loop strap
Stability & Load Capacity

The mount is manufactured from high-quality PETG and is designed for long-term use.

• High impact resistance and dimensional stability
• UV and water resistant
• Resistant to temperature fluctuations
• Resistant to vibrations

• Very stable construction due to a well-engineered geometry
• Provides a secure hold for your device over the long term

As part of a short-term load test, a load of 12 kg was tested without any visible deformation.
Manufacturing Process

This mount is manufactured using a precise 3D printing process. Each component undergoes a careful visual inspection.

Due to the manufacturing process, minimal print-typical surface characteristics may occur.

• Without any impact on stability, appearance, or function
• Not a quality defect

Installation & Setup

Required tools (tools are not included):
• Hex key (2.5 mm)

  1. Place the individual parts into the assembly position as shown in the illustration.
  2. Insert the safety nuts into the designated hexagonal recesses (the locking ring must face outward).
  3. Insert the screws and tighten them lightly. A slight resistance is sufficient.
  4. Hook the mount onto the bed frame.
  5. Insert the device as shown in the illustration and lightly tighten the hook-and-loop strap.
Shipping & Delivery

• Shipping from Germany
• Processing typically within 1–3 business days
• Delivery is carried out afterwards, depending on the delivery region, within a few business days
• Shipment tracking available after dispatch

Note on shipping to Switzerland:
Additional customs clearance fees may apply.
Estimated values: approximately 7.7% import VAT plus around 11–18 CHF (Swiss Post / DHL).
All fees are to be borne by the recipient. Information provided without guarantee.
Safety & Liability

Please observe the following safety instructions for proper use:

• Installation is carried out at your own responsibility
• Check the surface and wall condition before installation
• Use suitable mounting hardware appropriate for the surface
• Regularly check the mount and fasteners for a secure fit

Liability for damage resulting from improper installation, unsuitable surfaces, overloading, or external forces is excluded.

No liability is assumed for indirect damage or consequential damage, particularly to the mounted device.
Product & Material Information

• Not suitable for children – choking hazard due to small parts
• Use only for the intended purpose
• PETG may soften at temperatures above approximately 70 °C

Disposal:
• Dispose of PETG components with plastic waste
• Dispose of screws and washers with metal waste